www.click4troubleshoot.com

Dell 3000cn Toner73 Installation Process

admin — Thu, 02 Jul 2009 13:16:33 +0000

There have been some problems that people are running into when installing their new compatible toner and remanufactured toner. I want to address some of these issues, but first I have listed the step by step instructions to installing your Dell 3000cn toner.

These instructions are specifically for replacement toner, so if you have followed the instructions from your printer manual it may be the problem and you can proceed to the bottom of this page for troubleshooting.

(more…)

Troubleshoot:Taking out the battery of iPod

admin — Thu, 02 Jul 2009 12:54:51 +0000

Just like any other device, you can troubleshoot problems with your iPod to avoid the hassle of going through a lengthy warranty or return process. By searching the Internet and Apple’s web site, you may find a solution the problem your device is currently experiencing.

Proceed with caution, not all fixes will work for your iPod, and you may cause more harm than good if you do something wrong during a troubleshoot session.

(more…)

Basic troubleshooting of your iPod devices

admin — Thu, 02 Jul 2009 12:47:06 +0000

Most of the people are encountering various problems with their iPod devices. iPod restore issues, blue, black or white screens, erase, connect and shift problems, iPod won’t turn off (!), iPod falls into water, videos are not showing properly, audio is corrupted during playback and a lot more. The thing is that many of these issues can be resolved by following a basic troubleshooting routine every time you face a minor or major problem with your iPod. - First of all, you got to make sure your iPod is turned on! A lot of people get so enthusiastic with their iPods forgetting the fact that the iPod is still an electronic device that uses batteries. And batteries must be fully charged. No batteries, no electricity, no iPod. So make sure your batteries are properly and fully charged before turning on your iPod.

(more…)

Ubuntu: Wireless Network Connection Problem Analysis

admin — Wed, 24 Jun 2009 15:22:57 +0000

In setting up their wireless connection for the first time, Im discovering many individuals having problems connecting through Network Manager or other GUI wireless connection tools. In fact my Network Manager is intermittently buggy, connecting sometimes and not others. This guide benefits all users in case the GUI tools are not working, and is useful for testing a wireless connection during initial installation of wireless drivers since it provides for good debugging output.

Unencrypted/ WEP / WPA connections will be covered in this guide

Pre-requisites

1. Properly installed network driver — This guide can be used to troubleshoot driver installation to see if it is properly functioning

2. The ESSID of your router must be broadcasted and not hidden

3. Knowlege of your wireless cards driver (please see Prerequisite #4 to determine driver). Those using the r8187/r818x driver please see the end of the guide

4. Knowledge of your wireless card’s Interface Name – The user must know the proper interface of the wireless connection (wlan0, eth1, rausb1, etc). To discover this information, at command line type

lshw -C network

There may be multiple interfaces listed, however look under the section appropriate to your wireless device for the line labeled logical name. Here is an example

(more…)

Interop: Many Problems Among Virtualization’s Gains

admin — Wed, 24 Jun 2009 15:05:23 +0000

Asked to cite the most glaring problem of virtualization, 59% of the respondents indicate they lack experience to manage the technology appropriately.

Virtualization may be taking the IT world by storm, but many organizations aren’t getting the cost and resource savings promoted by the champions of virtualization, according to a study released at the Interop Conference and Expo in Las Vegas this week.

(more…)

Vista is running slow

admin — Fri, 19 Jun 2009 18:50:35 +0000

There are many possible causes and remedies for a

Vista system that is running poorly.
-Dual Boot or Multi-boot systems:
If your computer is setup to run two or more operating systems, you can select the boot order so that only one operating system
will start when your machine is turned on. Here’s how:

Go to Start>> Control Panel>> System and Maintenance>> System
Select Advanced System Settings. You may be prompted for an administrators password or confirmation at this point.
Select the Advanced tab
Select Settings under Startup and Recovery
Under the System startup category you’ll find a default operating systems list. Select the operating system that you would like to use when you start your computer.
Click OK and exit all windows. (more…)

Identify a Hardware Problem

admin — Fri, 19 Jun 2009 18:48:22 +0000

In this section I will show you how you can identify a hardware problem.
-Memory:
Normally,

Vista monitors your installed memory and will notify you when an error occurs. However, for the purpose of troubleshooting it is a good idea to run the Windows
Memory Diagnostic Tool manually to rule out a possible memory issue. Here’s how: (more…)

How can you WinVista System Restor

admin — Fri, 19 Jun 2009 18:45:13 +0000

If you do not know where to start and you don’t have a clue as to why you’re having trouble with

Vista, then I recommend using System Restore to take your system files back to a time when you were not having any trouble. To use System Restore, follow the instructions below:

Go to Start>> All Programs>> Accessories>> System Tools>> System Restore
Click Next
Select “Choose a different restore point”
Click Next
Select a date and time that you would like to restore to.
Click Next to begin the process
In the confirmation prompt, select Yes. (more…)

HP Notebook PCs - HD DVD Drive Issues in Windows Vista

admin — Sat, 13 Jun 2009 12:32:00 +0000

Understanding HD DVD technology

HD DVD stands for High Definition Digital Versatile Disc, and represents a step forward in information-storing technology. HD DVDs can store about three times as much information as the original DVDs that they are designed to replace. The HD DVD drive in your notebook cannot play Blu-ray movies; however, it can play both standard DVD movies and HD DVD movies. (more…)

HP Notebook PCs - ccApp.exe is not responding

admin — Sat, 13 Jun 2009 12:20:23 +0000

The following error message may appear when Windows restarts or boots:

ccApp.exe is not responding

Windows will either close the program automatically and restart, or you may be prompted to click End Now .

Solution

Download and install the latest update to your Norton software using LiveUpdate:

Click Start , All Programs , then Norton Antivirus or Norton Internet Security .
Click the LiveUpdate button.
Follow the on-screen instructions to install the updates.

For more information about this error message and LiveUpdate see the Symantec Support Article below.